BCGWX - ATLAC 382 FB 4010A
- MSDS: BCGWX
- Manufacturer: ICI AMERICAS INC
- Product Name: ATLAC 382 FB 4010A
- National Stock Number: 8030-00N001040
Product Identification
Product ID:ATLAC 382 FB 4010A
MSDS Date:01/01/1985
FSC:8030
NIIN:00N001040
MSDS Number: BCGWX
Responsible Party
WILMINGTON, DE 19897
US
Cage: 70657
Contractor
Cage: 70657
Ingredients
PROPOXYLATED BISPHENOL-A FUMARATE POLYESTER
Fraction By Weight: 50%
STYRENE, MONOMER (SARA III)
CAS: 100-42-5
RTECS: WL3675000
Fraction By Weight: 50%
OSHA PEL 100 PPM
ACGIH TLV: S,50PPM/100STEL;9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
TERTIARY BUTYL CATECHOL
CAS: 98-29-3
RTECS: UX1400000
DIMETHYLANILINE (N,N-DIMETHYL-ANILINE) (SARA III)
CAS: 121-69-7
RTECS: BX4725000
Fraction By Weight: 0.2%
OSHA PEL S, 5 PPM/10 STEL
ACGIH TLV: S,5 PPM/10 STEL;9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Effects of Overexposure:EYE/SKIN CONT:BURNS
IRRIT.INHALATION:IRRIT.INGESTION:IRRIT TO MOUTH,ESOPHAGUS,AND
STOMACH.
First Aid
First Aid:EYE CONT:FLUSH WITH WATER 15 MIN,CALL A MD.SKIN CONT:WASH
WITH SOAP & WATER CONTACT MD.INHALATION:REMOVE TO FRESH AIR GIVE
ATIF RESP IF NEEDED.CALL A MD.INGESTION:GIVE 1-2 GLASSES OF WATER
OR MILK TO DRINK,CALL A DR.
Fire Fighting
Flash Point:74F PMCC
Lower Limits:1.1
Upper Limits:6.1
Extinguishing Media:CO*2,DRY CHEMICAL
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS
Unusual Fire/Explosion Hazard:STYRENE:POLYMERIZATION MAY OCCUR AT
ELEVATED TEMPS.,CLASS IC FLAMMABLE LIQUID.
Accidental Release
Spill Release Procedures:SOAP UP WITH AN ABSORBENT SUCH AS SAND,EARTH
OR SAWDUST AND SHOVEL INTO WASTE CONTAINER.COVER AND REMOVE TO A
CHEMICAL WASTE AREA.WEAR EYE PROTECTION,PROTECTIVE CLOTHING AND
RESP PROT DURING CLEAN UP. BURN OFF FLAM MAT OR ALLOW TO
EVAPORATE.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT,SPARKS,OR
FLAMES.CHECK WEEKLY TO DETERMINE INHIBITER AND POLYMER CONTENT IF
STORAGE IS IN EXCESS OF 30 DAYS AT 90F.
Other Precautions:STYRENE VAPORS ARE UNINHIBITED AND MAY FORM POLYMERS
IN VENTS OR FLAME ARRESTORS OF STORAGE TANKS RESULTING IN STOPPAGE
OF VENTS.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:LOCAL TO CONTROL TLV
Protective Gloves:RUBBER GLOVES
Eye Protection:CHEM GOG/FACE SHIELD
Other Protective Equipment:RUBBER APRON
Supplemental Safety and Health
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:295F
Vapor Pres:4.3
Vapor Density:3.6
Spec Gravity:0.9
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER LIQUID,AROMATIC ODOR
Percent Volatiles by Volume:50
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIAL
Stability Condition to Avoid:HEAT,SPARKS,FLAMES
Hazardous Decomposition Products:ACRID FUMES,PHENOL DERIVATIVES AND
CARBON MONOXIDE
Conditions to Avoid Polymerization:HEAT,SPARKS,FLAMES.
Disposal
Waste Disposal Methods:DISPOSE OF WASTE MATERIAL IN ACCORDANCE WITH
LOCAL,STATE, AND FEDERAL POLLUTION REGULATIONS.CONTAINER
DISPOSAL:DO NOT REUSE,DISTRIBUTE,MAKE AVAILABLE OR FURNISH
CONTAINER EXCEPT FOR STORAGE OR SHIPMEN T OF ORIGINAL PRODUCT.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.